XCMAN Nordic Ski Tuning Equipment Nature Beech Wood Ski and Snowboard Wax Brushes

XCMAN Alpine Snowboard Nordic Ski Tuning Equipment Nature Beech Wood Ski and Snowboard Wax Brushes

Use a brass brush first, to remove debris, old wax, oxidation, etc. from base structure prior to waxing. Brass brushes can also be used after scraping to remove very cold waxes (green/blue) from the base structure. They also help raise loose P-tex hairs so they can be cut away with Scotch-Brite pad or a steel scraper. A horsehair brush follows the stiff nylon brush to further polish bases. Can be used after brass or bronze brushes when brushing out very hard waxes. Final brushing for most waxes, for 100% fluoro overlays use blue nylon. The stiff nylon bristles on this brush make it an exxcellent all around wax remover. Use as the first brush after scraping wax (unless wax is really hard, blue or green, then use brass first, nylon second). Follow with horsehair or non-abrasive pad for highly polished bases.

Product Features

• For best results, Four different brushes should be used. You could choose as per your requirement. All Brushes are made of Nature beech wood with very Good and Nice feeling in your hand.
• Nylon brush. 0.4mm(hard) . Nature Beech Wool;10 rowsx16 lines. Nylon to polish the base.
• Horsehair Brush. Size:11.7x7x2cm. Buff Hard Horsehair is ideal middle brush for freeing up the base structure after ironing, scraping and a few passes with a brass brush, or to set up fluoro powder into the base after scraping.
• Brass Brush. Size:11.7x7x2cm.Brass : 0.15mm. Beech Wool;10 rowsx16 lines. Buff Hard Brass is to be used before waxing to open the base structure and prepare the base for wax, and as a first brush after waxing and scraping. Brushes should be used in one direction (shovel to tail) to open the base structure, assist in cleaning the base and prepare the base for optimal wax absorption.
• Combo brush (brass and nylon ring). Brush size:11.7*7*3.5cm. Hard brass and stiff nylon can remove wax from any coarse base structures.Removing excess wax from the structure of a ski and nordic and snowboard after wax scraping,and make new and nice base structures lines.